16
GPS
Favorites Menu
The Favorites Menu allows the operator to select frequently used tools for
easy access during operations. Once set up, Cruizer will display the
Favorites Menu when the Tools Menu icon is selected.
To setup the Favorites Menu:
1. From the Home Screen, select:
Tools Menu Computer Favorites Menu .
2. On the Organize Favorites screen, select a category to view available tools
screens.
3. In the Favorites area, select the tools screen to display within the
Favorites Menu.
GPS Output - The GPS Output screen displays the available output
messages and the current output rates for each message. Baud rate
settings for Port A and B are also accessed via this screen. See the
Baud Rate Settings section on page 19 for details.
Set all output messages to zero if connecting an optional SmarTrax,
SmartSteer or TM-1 system to the Cruizer using the recommended
cables shown in the System Cable Drawings section on page 22..
Health - Displays DGPS signal and status information. Touch a point
shown in the satellite constellation display to view signal information
for each satellite currently used by the Cruizer.
Differential - Select the differential satellite PRN for GPS guidance.
If an e-Dif or L-Dif authorization code has been entered, the operator
may select the desired correction source for use with the Cruizer
guidance system.
To Next Page
Loading...
