Raven ENVIZIO PLUS - Creating Spray Zone Maps; Recording Field Boundary; Recording No-Spray Zones

33
2. Touch the ‘Spray Zones’ button to display the AccuBoom Spray Zones
Screen. From this screen, you can create, modify, and delete spray zone
maps.
Creating a New Zone Map (with Field Boundary and Spray Zones)
1. Press Create New Zone Map.
2. Type in a name for the spray zone map and press OK.
3. Press the Menu Button in the lower right corner of the screen and then
press Field Boundary, then Record Field Boundary.
4. Select the Recording Reference Point and press OK.
5. Begin recording the field boundary. When you are finished, press the
Menu button and select End Recording.