44
Adjust Brightness
This function allows you set the screen brightness for the Envizio Plus
system screen, the lightbar, and the external lightbar.
1. From the ‘Configuration Page 1’ screen, touch the ‘Next’
button. From the ‘Configuration Page 2’ screen, touch the ‘Next’
button. The ‘Configuration Page 3’ screen displays. Touch the ‘Next’
button. The ‘Configuration Page 4’ displays.
2. Touch the ‘Adjust Brightness’ button.
3. The ‘Brightness Settings’ screen displays. From this screen you can set
the brightness for the backlight of the Envizio Plus display screen, the
Envizio Plus lightbar, and an external lightbar. Touch the right arrow
for each of these to increase the brightness, or touch the left arrow to
decrease it. Touch ‘Done’ when you are finished adjusting the
brightness settings.
4. Touch ‘Done’ again when you are finished with this setup page.
To Next Page
Loading...
