45
Select Language
This function allows you to set the display language for the Envizio Plus sys-
tem.
Currently, the options are English, Spanish, or Portuguese.
1. From the Configuration Page 1 screen, touch the ‘Next’
button. From the Configuration Page 2 screen, touch the ‘Next’
button. The Configuration Page 3 screen displays. Touch the ‘Next’
button. The Configuration Page 4 displays.
2. Touch the ‘Select Language’ button until the desired language
displays, either English, Spanish, or Portugese.
3. Touch ‘Done’ when you are finished with this setup page.
Demo Mode
This function allows you to set a ‘demo’ mode for the Envizio Plus system.
This mode allows you to run a demo of the Envizio Plus system without
requiring DGPS input. The demo file is a built-in part of the Envizio Plus
software, so no uploading is necessary.
1. From the Configuration Page 1 screen, touch the ‘Next’
button. From the Configuration Page 2 screen, touch the ‘Next’
button. The Configuration Page 3 screen displays. Touch the ‘Next’
button. The Configuration Page 4 displays.