Why SC1/TC1 system cannot be enabled on Raven RS1/HDU?
The SC1/TC1 system cannot be enabled because the SC1/TC1 disengage sensor is out of range or disconnected. Reconnect or adjust the SC1/TC1 disengage sensor.
What to do if operator presence switch is disconnected on Raven RS1/HDU?
If the operator presence switch is disconnected, reconnect the operator presence switch.
What to do if machine speed exceeds maximum auto-steer speed on Raven Farm Equipment?
If the machine speed exceeds the maximum auto-steer speed, causing auto-steering to disengage, reduce the machine speed below the maximum engage speed and then re-engage auto-steering.
What to do if the master switch is set to 'road mode' on Raven Farm Equipment?
If the SC1/TC1 system cannot be enabled because the master switch is set to “road mode,” toggle the master switch to “field mode.”
General| Brand | Raven |
|---|---|
| Model | RS1/HDU |
| Category | Control Systems |
| Language | English |
To Next Page
