Raven Sidekick Pro - Page 17

Installation: 15
INSTALLATION
FIGURE 14. Alternative Mixer and Valves Mounted on Sprayer Center Rack
2. Mount couplings as close to each other as possible.
NOTE: Large spaces between the couplings increase the risk that liquid stays in the boom when cleaning or
injected liquid enters the main tank when the sprayer is in normal operation mode.
Return Spray Boom
Begin Spray Boom
3-Way Outlet Valve
3-Way Inlet Valve
Return Spray Boom
Recirculation Pump
Check Valve
Mixer
Injection Point/
Pressure Sensor
Check Valve
Flow Meter