Raycus RFL-C1500 - Optical Safety; Electrical Safety

Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide of 1500W CW laser
1: Laser Output Head
2: Type 4 Laser
Product
3: Class 2M Laser Product
Label-1mW Red Laser
4: CE Authentication
5: ID Label
6: Laser Radiation
Hazard
7: Electrical
Hazard
1.4 Optical Safety
Any dust on the end of the collimator assembly can burn the lens.

CAUTION: DO NOT emit laser when the protective
cap is not removed, otherwise the lens or crystal will be
damaged.
1.5 Electrical Safety
1) Make sure the product is firmly grounded through the PE line of the AC
power cord.

WARNING: Any interruption from the protective earth
will electrify the enclosure, which may result in personal
injury for operators.
2) Make sure that the correct voltage of the DC power source is used.
6