Raycus RFL-C2000X User Manual

Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL- RFL-C1500X/C2000X
CAUTION: The fiber optic cable and output head is precise optic
instrument, any vibration or impact to the output head, and twist or
excessive bend to the cable will damage the instrument.
2.5 Operation Environment
The basic operation conditions are listed in the table below:
Table 3 Basic Operation Conditions for the Laser
Model
C1500X
C2000X
Supply Voltage(V)
380±10% V AC 50/60Hz
Supply Capacity(kW)
5.5
6.5
Installation Requirements
Install on flat surface, no vibration or impact
Ambient Temperature
（℃）
10
～
40
Relative Humidity（%）
＜70
Warning
：
1) Ensure reliable grounded before using the laser.
2) The laser output is connected to the output cable. Please check the laser output carefully
to prevent dust or other contamination. Use special paper when cleaning the laser output lens.
3) If the laser is used in accordance without the method specified in this manual, the laser
may be in abnormal working state and cause damage.
4) It is strictly forbidden to install the laser output when the laser is in operation.
5) Do not look directly into the laser output. Be sure to wear protective glasses when
operating the laser.
 Do not expose this product to high humidity（＞95%）
 Do not let this product work below the ambient dew point temperature
Table 4 The Constant Dew Point Table
AMBIENT DEW POINT
Room
Maximum Relative humidity

Raycus RFL-C2000X Specifications

General

Brand	Raycus
Model	RFL-C2000X
Category	Measuring Instruments
Language	English