Raycus RFL-C2000X - Steps of Shutting Down

Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL- RFL-C1500X/C2000X
4.8 Steps of shutting down
Please turn off the laser in the order below:
1) Turn off the emission;
2) Turn the key switch to the "OFF" position and release “LASER” button;
3) Turn off the chiller;
4) If the product have air conditioner please waiting 10 minutes for the air conditioner to
continue working. If the laser does not have air conditioner, please ignore this step;
5) Disconnect the air switch;
6) Cover the output head protection cap;