Raycus RFL-C2000X - Electrical Safety

Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL- RFL-C1500X/C2000X
These safety labels include warning labels, apertures through which laser radiation is
emitted and labels of certification and identification, etc. Specifications of these labels are as
follows:
Table 1: Specifications of Safety Labels
(Take 500W for example)
1.Aperture Label
2.Class 4 Laser Product
3.Class 2M Laser Product
Label for Guide Laser
4. CE Compliance
5. Identification Plate
6.Laser Radiation Hazard
Label
7.Electrical Hazard
1.4 Optical Safety
Any dust on the end of the collimator assembly can burn the lens and damage the laser.
CAUTION: If the output of the device is delivered through a lens with
an anti-reflection coating, make sure that the lens is of good quality and
clean.
1.5 Electrical Safety
(1) Make sure your product is grounded through the PE line of the AC power cord. The
grounding must be firm and reliable.