Raymarine c97 - Page 132

Waypointgroups
Inordertomakeyourwaypointseasiertomanage,youcan
organizethemintogroupsofyourchoice.Whenshing,for
example,youmayonlywishtoseethewaypointsthatindicate
goodshingsites.
Providedthatyouhavenotchangedthedefaultgroup,all
waypointsareautomaticallyplacedinthedefault“MyWaypoints”
groupwhentheyarecreated.
Note:Awaypointcanonlybelongtoonegroup.
Displayingthewaypointgrouplist
Fromanyapplication:
1.SelectWPT.
2.SelectWaypointAndGroupOptions.
3.SelectViewGroupList.
Thewaypointgrouplistisdisplayed.
Youcannow:
•Makeanewwaypointgroup.
•Renamewaypointgroups.
•Erasewaypointgroups.
Note:YoucannotrenameorerasethedefaultMyWaypoints
group.
Makinganewwaypointgroup
WiththeWaypointGroupListdisplayed:
1.SelectAddNew.
Theon-screenkeyboardisdisplayed.
2.Selectthenameeld.
3.Usetheon-screenkeyboardtoentertherequirednamefor
yournewwaypointgroup.
4.selectSAVE.
Movingwaypointsbetweengroups
1.Fromanyapplication,selectWPT.
2.SelectViewWaypointList.
3.SelecttheWaypointyouwishtochangethegroupof.
Thewaypointoptionsdialogisdisplayed.
4.SelectEditWaypoint.
5.SelecttheGroupeld.
Alistofavailablewaypointgroupsisdisplayed.
6.Selectthegroupyouwishtomovethewaypointto.
Thewaypointismovedtothenewgroup.
Note:TheWaypointslistcanalsobeaccessedfromthe
homescreenbyselectingWPT.
Renamingawaypointgroup
WiththeWaypointGroupListdisplayed:
1.Selectthegroupyouwanttorename.
2.SelectEditGroupName.
Theon-screenkeyboardisdisplayed.
3.Usingtheon-screenkeyboard,editthegroupname.
4.SelectSAVE.
Changingthedefaultwaypointgrouporsymbol
FromtheWaypointAndGroupOptionsmenu:
•accessedviathehomescreen:MyData>WaypointAnd
GroupOptions,or
•accessedviathechartapplication:Menu>MyData>
WaypointAndGroupOptions,or
•accessedfromanyapplication:WPT>WaypointAndGroup
Options
1.SelectSelectDefaultGroup.
Alistofgroupsisdisplayed.
2.Selectthegroupyouwantallnewwaypointstobeplaced
inbydefault.
3.SelectDefaultSymbol.
4.Selectthesymbolyouwantallnewwaypointstobeassigned.
Erasingawaypointgroup
Whenyoueraseawaypointgroup,thegroupnameiserased
fromthesystemandthewaypointsthatwereinthatgroupare
movedtotheMyWaypointsgroup.Youcaneraseanywaypoint
groupexceptthefollowing:
•the‘MyWaypoints’group,
•agroupcontaininganactivewaypoint,
•agroupthatcontainswaypointsthatarepartofastoredroute.
WiththeWaypointGroupListdisplayed:
1.Selectthewaypointgroupthatyouwanttoerase.
2.SelectEraseGroup(ButKeepWaypoints).
3.SelectYestoconrmtheaction,orNotocancel.
Erasingawaypointgroupanditswaypoints
Toeraseawaypointgroupandallofthewaypointsinthatgroup
followthestepsbelow:
Fromthehomescreen:
1.SelectMyData.
2.SelectErasefromSystem.
3.SelectEraseWptsfromSystem.
Thewaypointsgrouplistisdisplayed.
4.SelectThewaypointgroupthatyouwanttoerase.
Aconrmationpop-upmessageisdisplayed.
5.SelectYestoconrmthedeletion.
Thewaypointgroupandallwaypointsinthatgrouphavenow
beenerasedfromthesystem.
132NewaSeries/NewcSeries/NeweSeries