Raymarine c97 - Page 135

•Fromaselectedwaypointoranylegwithinaroute.
Youcanalsofollowanyrouteinreverseorder.
Followingastoredroute
Fromthechartapplication:
1.SelectMenu.
2.SelectNavigate.
3.SelectFollowRoute.
TheRoutelistisdisplayed.
4.Selecttherouteyouwanttofollow.
5.SelectFollowRoute.
Cancellingnavigationofaroute
Fromthechartapplication:
1.SelecttheRoute.
Theroutecontextmenuisdisplayed.
2.SelectStopFollow.
Arrivingatawaypoint
Asyourvesselapproachesawaypoint,thewaypointarrival
alarmprovidesawarning.
1.SelectOkonthewaypointarrivalalarmpopupmessage.
Oncethealarmisacknowledged,thenextwaypointisselected,
andthedisplayupdatestoindicatethenextlegoftheroute.
Note:Youcansettheapproachdistance(radius)atwhichthe
waypointarrivalalarmwillsoundusingtheAlarmsmenufrom
thehomescreen:Set-up>Alarms>WaypointArrival.
Advancingtothenextwaypointinaroute
Youcanskipthecurrentactivewaypointandadvancetothe
nextwaypointinarouteatanytime.
Whilefollowingarouteinthechartapplication:
1.Selecttheroute.
Theroutecontextmenuisdisplayed.
2.SelectAdvanceWaypoint.
Note:Ifthecurrentdestinationisthelastwaypoint,thechart
advancesontotherstwaypointintheroute.
CrossTrackError(XTE)
CrossTrackError(XTE)istheamountofdeviationfromyour
intendedrouteorwaypoint,expressedasadistance.
D117 65-2
XTE
Intheeventthatyousteeroff-track,youcangostraighttoyour
targetbyresettingXTE.
ResettingCrossTrackError(XTE)
Whilefollowingarouteinthechartapplication:
1.Selecttheroute.
Theroutecontextmenuisdisplayed.
2.SelectRestartXTE.
ResettingXTEresultsinanewcoursefromthecurrentvessel
positiontothecurrenttargetwaypoint.Thisdoesnotaffect
yoursavedroute.
D12 29 5-1
YoucanalsoresettheXTEfromtheNavigateMenu:Menu>
Navigate>RestartXTE.
Followingarouteinreverseorder
Fromthechartapplication:
1.Selecttheroute.
Theroutecontextmenuisdisplayed.
2.SelectFollowRouteInReverse.
YoucanalsoselectFollowRouteInReversebyselectinga
routefromtheroutelist:Menu>Navigate>FollowRoute.
Revieworeditaroute
Thereareavarietyofattributesassociatedwithroutes.These
canbereviewedandedited.
Youcan:
•Showorhidearouteonthechartscreen.
•Reviewdetailsoftheroute
•Changethenameorcolorofaroute.
•Add,moveandremovewaypointsfromaroute.
•Changetheroutelineswidth.
Note:Anactiveroutecanbeedited,withtheexceptionofthe
activewaypoint.Ifawaypointbeingeditedbecomesactive,
thenthesystemshallcanceltheedit;thewaypointshall
remaininitsoriginalposition.
Showingorhidingaroute
Fromthechartapplication:
1.SelectMenu.
2.SelectMyData.
3.SelectDisplayMyData.
4.SelectSelectRoutesToDisplay.
Thedisplayroutesdialogisdisplayed.
5.SelecttheroutetoswitchbetweenShowandHide.
Selectingaroutetorevieworedit
1.Dooneofthefollowingtoselecttherequiredroute:
•Withthechartapplicationactive,selectarouteonscreen
todisplaytheroutecontextmenu.
•Withthechartapplicationactive,select:Menu>MyData
>RouteListandselecttherequiredroutefromthelist.
•Fromthehomescreen,select:MyData>RouteListand
selecttherequiredroutefromthelist.
Addingawaypointtoarouteonthechartscreen
Fromthechartapplication:
1.Selecttheappropriatelegoftheroute.
Theroutecontextmenuisdisplayed.
2.SelectInsertWaypoint.
3.Selectthelocationforthenewwaypoint.
Thelegoftherouteisstretchedtoincludethenewwaypoint.
Removingawaypointfromaroute
Fromthechartapplication:
1.Selectthewaypointyouwanttoerase.
Thewaypointcontextmenuisdisplayed.
2.SelectEraseWaypoint.
Theerasewaypointpopupmessageisdisplayed.
3.SelectYestoconrmorNotocanceltheaction.
Waypoints,RoutesandTracks
135