Raymarine c97 - Page 154

3.SelectLayers.
4.Select3DDisplayOptions.
5.SelectTransducerConesothatOnishighlighted.
SelectingTransducerconewillswitchthefunctiononandoff.
Enablingdepthscale
Toenableadepthindicatoratyourvesselslocationfollowthe
stepsbelow:
In3Dview:
1.SelectMenu.
2.SelectPresentation.
3.SelectLayers.
4.Select3DDisplayOptions.
5.SelectDepthScalesothatOnishighlighted.
Selectingdepthscalewillswitchdepthindicatoronandoff.
2DChartUse
InadditiontonormalnavigationchartsFishmodeprovides
bathymetriccontourdataonthechartforuseduringshing.
Beforeyoucandisplaybathymetricdatainthechartapplication
youmusthavechartcardswiththerelevantlevelofdetail.
Whenyouchangethe2DChartUsetotheFishoption,
bathymetricdataisshownonthechart(providingthatthechart
cardcontainsbathymetricdataforthatparticularlocation).
Certainchartdetailisalsoremovedtoensurethebathymetric
datacanbeseenclearlyonthechartdisplay.
IfthechartcarddoesNOTcontainbathymetricdatathechart
revertstothedefaultNAV(navigation)data.
Note:Fishmodeisnotsuitablefornavigation.
Selectingshmode
Fromthechartapplication:
1.SelectMenu.
2.SelectPresentation.
3.Select2DChartUsesothatFishishighlighted.
Selecting2DchartusewillswitchthechartbetweenFish
andNavigationmodes.
Multiplechartsynchronization
Youcansynchronizetheheading,range,andposition
informationacrossmultiplechartviewsandnetworkeddisplays.
Whenchartsynchronizationisenabled:
•Itisindicatedby“CHRTSync”inthechartapplicationtitlebar.
•Anychangesmadetotheheading,rangeorpositioninany
chartinstancewillbereectedinallotherchartinstances.
Note:Whenthe2Dand3Dchartviewsaresynchronized,the
MotionModeisalwaysRelativeMotion.
Synchronizingmultiplechartinstances
Fromthechartapplication:
1.SelectMenu.
2.SelectPresentation.
3.SelectChartSync.
4.SelectChartfromthelist.
Atickisplacednexttotheselectedoption.
5.Repeatthestepsaboveforeachchartinstanceandif
requiredoneachnetworkedmultifunctiondisplayyouwant
tosyncthechartview.
Note:Youcannotsynctoanotherchartifradarsyncisturned
on.
154NewaSeries/NewcSeries/NeweSeries