Raymarine c97 - Page 221

3.UsetheImageTypemenuitemtoswitchbetweenIRand
VisibleLightviews,asappropriate.
Thermalcamerarearviewmode
Therearviewmodeipsthevideoimagehorizontally,providing
a“mirrorimage”.
Thisisusefulforexampleininstanceswherethecamerais
rear-facingandyouareviewingtheimageonaforward-facing
monitor.
Enablingthermalcamerarearviewmode
Withthethermalcameraapplicationdisplayed:
1.SelectMenu.
2.SelectImageOptions.
3.SelectRearView.
SlewtoCue
Slewtocueisafeaturewhichmaintainsaselectedpositionor
objectinthethermalcameraseldofview.SlewtoCueoptions
areavailableinthechartandradarapplicationsastargetcontext
menuitems.
Note:HeadingdatamustbeavailableonthesystemforSlew
toCuetoworkcorrectly.
Fordetailsonhowtoselectatargetto‘slewto’refertotheradar
andchartsectionsofyourmanual.
Thethermalcameracanalsoautomaticallyslewto:
•MOBtarget
•DangerousAIStarget
•DangerousMARPAtarget
Optionstoenableordisabletheautomaticslewoptionsare
availableinthethermalcameraapplication
Settingthecamera'sheightabovesealevel
Toensurethatthethermalcamera’salignmentcanbeset
correctlytheheightofthecameraabovesealevelmustbeset.
Fromthethermalcameraapplication:
1.SelectMenu.
2.SelectCameraSet-up.
3.SelectSlewSettings.
TheSlewsettingspageisdisplayed.
4.SelectCameraheightabovesealevel.
TheCameraheightabovesealevelpopupisdisplayed.
5.Adjustthevaluetotherequiredsetting.
Aligningthethermalcamerahorizontally
Ifyoundthatslewtocueobjectsareconsistentlytoofarleftor
rightonthescreenthenyoucanmakeneadjustmentstothe
camerasalignmentbyfollowingthestepsbelow.
Fromthethermalcameraapplication:
1.SelectMenu.
2.SelectCameraSet-up.
3.SelectAligncamera.
TheAligncameratoboatpopupisdisplayed.
4.Adjustthevaluetotherequiredsetting.
Thisvaluewilladjustthecamera’soffsetpositiontoportor
starboard.
Aligningthethermalcameraselevation
Ifyoundthatslewtocueobjectsareconsistentlytoolowor
highonthescreenthenyoucanmakeneadjustmentstothe
camerasalignmentbyfollowingthestepsbelow.
Fromthethermalcameraapplication:
1.SelectMenu.
2.SelectCameraSet-up.
3.SelectElevAlign:.
TheAligncameratoboatpopupisdisplayed.
4.Adjustthevaluetotherequiredsetting.
Thisvaluewilladjustthecamera’soffsetpositiontoportor
starboard.
Enabling/disablingautomaticslewtocue
Fromthethermalcameraapplication:
1.SelectMenu.
2.SelectCameraSet-up.
3.SelectSlewSettings.
TheSlewsettingspageisdisplayedwhichincludesthe
followingautoslewoptions:
•AutoSlewtoMOB
•AutoSlewtoDangerousAIStarget
•AutoSlewtoDangerousMARPAtarget
4.Selecttherelevantoption.
Selectinganoptionfromthelistwillswitchtheautoslew
optionforthatitemOnorOff.
Thermalcameraapplication—Panandtiltcameras
221