24 DSM300 and DSM30 Installation Manual
iii. An audible alarm is sounded.
iv. The normal sonar image resumes scrolling across the display.
The reset is complete.
➤ To cancel the reset:
Before pressing YES as described in item 4 above, press any of the following
keys: DISPLAY, MULTI, VRM/EBL, MARKS, RANGE, GAIN, or
ALARMS.
This action opens up a new menu according to the key pressed.
—or—
Press either the ENTER or CLEAR key. This action returns the unit to the
Sonar Set Up menu.
To Next Page
Loading...
