Raymarine E70096 - Bracket Mounting the EV-1

1.UsingtheMountingtraytemplate(87170),drill4holesinthemountingsurface
,plusa22mm(7/8
in)holefortheSeaTalkng®cable.
2.PlacethesmallsealingringinthegroovelocatedonthebottomoftheMountingtray.
3.Securethetraytothemountingsurfaceusingthe4xfixings,supplied.
4.PlacethelargesealingringintothegrooveontheuppersideoftheMountingtray.
5.PulltheSeaTalkng®cablethroughthemountingsurfaceholeandtheMountingtray.Pluginthe
cableconnectorontheundersideoftheunitandsecurebyrotatingthelockingcollarclockwise2
clicks.
6.Inserttheunitintothemountingtray,ensuringthetabsintheMountingtrayareslottedintothe
groovesaroundtheedgeoftheunit.
Important:
TheunitmustbemountedwiththeLED‘arrow’inparallelalignmentwiththelongitudinalaxis
(centerline)ofthevesselandbepointingtowardsthevessel’ sbow.
7 .PlacetheMountingtrimovertheunitslightlyoffset,andthentwisttheMountingtrimclockwise
untilitlocksintoposition.
Brack etmountingtheEV-1
ThesuppliedDeckmountingkitisusedtomounttheunitonaverticalsurface.
Ensurethatthechosenlocationmeetstheproduct’slocationrequirements;refer
to:p.42—Locationrequirements—EV–1andEV–2
Important:Theinstallationmustonlybeperformedwiththevesseleitheronahardstanding,or
tied-upalongsideapontoonorberth.
Installation
47