Set-up and Calibration
21
www.raymarine.com
SETUP UNITS - Units Chapter
In each case press the button quickly to edit, press the or
to change units and press the button quickly to select the
chosen units. Default values are indicated in bold.
S6 Speed
The units in which ALL speed related information is
displayed.
The options available are: KNOTS, KPH (Kilometres per
hour) or MPH (Statute Miles per hour).
S7 Depth
The units in which ALL depth related information is
displayed.
The options available are: FEET, METRES or FATHOMS.
S8 Wind
The units in which ALL wind speed related information is
displayed.
The options available are: KNOTS or M/S (Metres per
second).
S9 Distance
Sets the units in which ALL Distance related information is
displayed.
The options available are: NM (Nautical Miles), KM
(Kilometres) or SM (Statute Miles).
S10 Temperature
Sets the units in which water temperature information is
displayed.
The options available are:
o
C (Degrees Celsius) or
o
F
(Degrees Fahrenheit).
To Next Page
Loading...
