Raymarine Ray260 - GPS Information and Handset Priority

6.12Changingthetransmitpower
Youcanchangethepowerlevelatwhichtheradiotransmitsat
byfollowingthestepsbelow.
1.PressandreleasetheMENU/DSCbuttontodisplaythe
mainmenu.
2.SelectVHFOPERATION.
3.SelectHI/LOPOWER.
4.SelecttheHI/LOsoftbuttontoswitchbetweenhighandlow
power.
6.13GPSsetup
WhenconnectedtoaGPSreceiveroverNMEA0183or
SeaTalk
ng
,theradiocandisplayrelevantGPSinformation.
Theinformationthatcanbedisplayedisasfollows:
•latitude
•longitude
•UTCtime
•COGandSOG
WhenGPSdataisavailabletheGPSsatelliteiconisdisplayed
on-screen.
IfnoGPSdataisavailablethenthelatitude,longitudeandtime
canbeenteredmanuallysothatitcanbeincludedinDSC
distresstransmissions.
Positiondatareceivedfromothervesselscanbesenttoand
displayedonaconnectedRaymarinemultifunctiondisplay.
NoGPSposition
IfnoGPSdataisavailable,after10minutesofnodatathe
GPSiconashes,NOPOSDATAandNOGPSisdisplayedon
screenandanaudiblewarningissounded.
OncethewarninghasbeenacknowledgedtheGPSiconwill
continuetoashandNOGPSwillremainonscreen.The
warningwillberepeatedevery4hoursaslongaspositiondata
isstillunavailableorhasnotbeenenteredmanually.
Ifpositiondatahasbeenenteredmanuallybuthasnotbeen
updatedduringtheprevious4hourstheGPSiconashes,POS
DATAOLDisdisplayedonscreenandanaudiblewarningis
sounded.Thiswarningwillberepeatedevery4hoursuntil
positionismanuallyupdatedorGPSpositiondatabecomes
available.
Wherenopositiondataisavailableorhasnotbeenmanually
updatedfor23.5hoursthenpositiondatawillchangeto‘9’sand
timedatawillchangeto‘8’s.
Enteringpositiondetailsmanually
IfnoGPSreceiverispresentyoucanmanuallyenteryour
positiondetails.
Fromthemainmenu:
1.SelectGPSSETUP.
2.SelectMANUALPOS.
TheManualpositionscreenrequiresyoutoinputlatitude,
longitudeandUTCtime.
3.UsetheChannelUpandChannelDownbuttonstocycle
throughtheavailablecharacters.
4.SelectOKtomovetothenextcharacter.
5.UsetheRightArrowandLeftArrowsoftbuttonstohighlight
thenextorpreviouscharacter.
6.Whentherelevantinformationhasbeenenteredselect
DONEtoconrmthedetails.
SelectingGPSinformationtodisplay
on-screen
YoucanselectwhichGPSinformationisdisplayedon-screen.
FromtheGPSsetupmenu(Mainmenu>GPSSETUP):
1.SelectSETTING.
ThelistofGPSinformationisdisplayed:
•LAT/LONDISPLAY
•TIMEDISPLAY
•TIMEOFFSET
•TIMEFORMAT
•COG/SOG
2.Selecttherelevantoption.
3.SelectONtodisplaythisinformationon-screenandOFFto
hidetheinformation
Gettingstarted
39