Raymarine ST30 Round Bidata - 3.3 Connecting Power Supply Direct

12 ST30 Round Bidata Owner’s Handbook
3. Pass the SeaTalk and transducer cables through the seal. Plug these
cables into appropriate instrument ports.
4. Secure the instrument using the fixing studs, “C” bracket, and
thumb nuts as shown.
D1600-2
bidata
depth
speed
depth
speed
3.3 Connecting the power supply direct
CAUTION
Ensure that the power supply is protected by a 5 A fuse or circuit
breaker.
1. Plug the 2 m (6 ft) power cable into one of the SeaTalk ports.
2. Connect the red wire to 12 V (+) and the screen to 0 V (-). Protect
the circuit with a 5 A fuse/circuit breaker.
D1602-2
075_4c03.p65 11/04/01, 11:2712