14 ST30 Round Bidata Owner’s Handbook
3.6 Installing the Biducer transducer
The ST30 Round Bidata is supplied with a combined speed and depth
transducer (Biducer). This should be installed in accordance with the
instructions provided.
Cable connections
The cable from the Biducer consists of five cores which should be
connected to the Bidata as follows:
Cable colour Bidata connection
Green Green SPEED
Screen Grey SPEED
Red Red SPEED
Blue Blue DEPTH
Black Black DEPTH
3.7 Calibration requirement
Once installation is complete and before you use your instrument, carry
out the calibration procedures detailed in Chapter 4, Calibration.
075_4c03.p65 11/04/01, 11:2714
To Next Page
Loading...
