Chapter 4: Calibration
21
Calibration
This screen controls access to basic calibration, to protect the settings
from accidentally being changed. Use the speed key (toggle action) to
select the required setting: CAL ON (1) or CAL OFF (0).
Boat show
This is a simulation program for dealer use only: 1 = ON and 0 = OFF.
Depth and speed damping
Damping controls the rate at which the displayed data is updated. The
selectable range, adjusted using the speed key, is between 1 and 15,
with 1 providing a rapid update and 15 a slow but smooth display
update.
Saving extended calibration
Press and hold depth and speed together for 2 seconds.
Exit extended calibration without saving
Press depth and speed together momentarily.
075_4c04.p65 11/04/01, 11:2721
To Next Page
Loading...
