25
Chapter 2: Maintenance & Troubleshooting
2.1 Maintenance
Servicing and safety
• Raymarine equipment should be serviced only by authorised Raymarine
service technicians. They will ensure that servicing procedures and
replacement parts used will not affect performance. There are no user-
serviceable parts in any Raymarine product.
• Some products generate high voltages, and so never handle the cables/
connectors when power is being applied to the equipment.
• When powered up, all electrical equipment produces electromagnetic
fields. These can cause adjacent pieces of electrical equipment to interact
with one another, with a consequent adverse effect on operation. In order
to minimise these effects and enable you to get the best possible perfor-
mance from your Raymarine equipment, guidelines are given in the
installation instructions, to enable you to ensure minimum interaction
between different items of equipment, i.e. ensure optimum Electromag-
netic Compatibility (EMC).
• Always report any EMC-related problem to your nearest Raymarine
dealer. We use such information to improve our quality standards.
• In some installations, it may not be possible to prevent the equipment
from being affected by external influences. In general this will not dam-
age the equipment but it can lead to spurious resetting action, or momen-
tarily may result in faulty operation.
Instrument
Certain atmospheric conditions may cause condensation to form on the
instrument window. This will not harm the instrument and can be cleared by
increasing the illumination setting to Level 3.
Cleaning
Do not use chemical or abrasive materials to clean your instrument.
Do not wipe the instrument with a dry cloth as this could cause
scratches.
Periodically clean your ST60 Graphic Display with a soft damp cloth.
81226_1.book Page 25 Wednesday, November 19, 2003 9:53 AM
To Next Page
Loading...
