Raymarine ST7001 - How Do I Leave Track Mode; What Is Cross Track Error

14 ST7001+ Smartpilot Controller Operating Guide
How do I leave Track mode?
You can leave Track mode at any time by:
• pressing auto to return to Auto mode
• pressing standby to steer manually in Standby mode
What is Cross track error?
Cross track error (XTE) is the distance between the current position and a
planned route. The SmartPilot receives the cross track error information
D5445-2P
Current
heading
Previous
heading
From auto mode, press track to enter Track mode . . . . . . then press track again to turn boat to waypoint.
Automatic track acquisition
Waypoint at 270˚ Waypoint at 270˚
Waypoint 1
Waypoint 2
Cross track error (XTE)
more than 0.3 nm
D4231-3P
Planned route
Actual route