Raypak AVIA 264 - Remote Error Displays; Remote Wire Error; Correct Remote Wiring Connections

OPERATION & CONTROLS
Remote Error Displays
1. RemoteError-Remoteiswiredimproperly.Orange/black(Spa)andblack/orange(Pool)
are receiving power at the same time.
2. Remote operation has been initiated and UP and DOWN arrows and MODE key on the
touchpad are disabled
3. ExitRemoteModetoadjustPool/Spa set temperature. Press UP and DOWN buttons for
3 seconds to disable Remote mode.
1 3
Correct ways to connect remote wiring
POOL SPA
22