Raypak CROSSWIND-65-O User Manual

Catalog No. 6100.64
E󰀨ective: 11-15-19
Replaces: New
P/N 241827 Rev.1
INSTALLATION
AND OPERATION
MANUAL
FOR YOUR SAFETY: Do not store or use gasoline or other ammable vapors and
liquids or other combustible materials in the vicinity of this or any other appliance. To
do so may result in an explosion or re.
Crosswind
Side Discharge
Heat Pump Pool Heater
NOTE: The instructions in this manual are for the use of qualied individuals specially trained and experienced
in the installation and maintenance of this type of equipment and related system components. Installation and
service personnel are required by some states to be licensed. Persons not qualied shall not attempt to install,
service, or maintain this equipment.
This manual should be maintained in legible condition and kept adjacent to the heat pump pool heater or in a
safe place for future use.
Inverter Models
CROSSWIND-30-I through -65-I
On/O󰀨 Models
CROSSWIND-40-O through -65-O
(Canada Only)
6100.64_Crosswind.indd 1 11/26/2019 4:16:40 PM

Raypak CROSSWIND-65-O Specifications

General

Model	CROSSWIND-65-O
Category	Swimming Pool Heater
Heating Capacity	65, 000 BTU/hr
Ignition Type	Electronic
Efficiency	82%
Fuel Type	Natural Gas or Propane
Voltage	120 VAC

Summary

1. Warnings and Hazard Alerts

2. Water Chemistry Management

3. Before Installation Guidelines

Installation Considerations

Guides on optimal heater placement for efficiency and service access.

4. Electrical Wiring and Connections

Wiring Procedures

Guidelines for safe electrical installation by a licensed electrician.

Electrical Connection Details

Requirements for electrical connections and adherence to wiring standards.

Automation Control Wiring (Inverter Models)

Details wiring for automation control and temperature automation systems.

5. Wiring Diagrams

6. Controls and Operation Display

Inverter Model Controls

Explains the operation display and buttons for inverter models.

On/Off Model Controls

Setting Pool Water Temperature

Instructions for adjusting the desired pool water temperature via the display.

7. Operating Instructions

Start-Up Procedures

8. Troubleshooting Common Issues

Common Faults and Solutions

Lists common failure reasons, their solutions, and associated display codes.

Fault Codes

Provides a comprehensive list of fault codes for Inverter and On/Off models.

9. Technical Parameters (Inverter Models)

Technical Parameters (On/Off Models)

12. Warranty Terms and Conditions

Limited Warranty Details

Scope of Warranty Coverage

Warranty Effective Date

Warranty Period (Unregistered)

Extended Warranty Period (Professional Installation)

Warranty Exclusions