W/AL SCANNING WITH MAM SENSOR
Mount the X2 MAM sensor in the holder.
Place the holder centered on the table, tight to the chest wall.
Settings:
Philips MicroDose: Stop delay: 2 s. W/Al Philips, if kVp is desired.
Fischer SenoScan:
Stop delay: 2 s. W/Al, if kVp is desired.
Adani: Stop delay: 2 s. W/Al, if kVp is desired.
Always use the compression paddle, positioned as high as possible. Do not use the AEC functionality.
To Next Page
Loading...