RayTek MI3 - Thermocouple Output TC Configuration

Outputs
42 Rev. G Nov/2015 MI3
6.5 Thermocouple Output TC
Comm Box:
metal
Source:
object temperature
Signal:
TCJ, TCK, TCR, or TCS
Terminal:
TC, GND
This output can be configured as thermocouple output type J, K, R, or S. For that output, you must
install a dedicated compensation cable. The output impedance is 20 Ω. The output is short circuit
resistant.
The outputs <OUT1> and <TC> are not available at the same time!