The RAZ Memory Cell
Phone Environment
In order to make the experience as simple
as possible, the user cannot exit the RAZ
Memory Cell Phone environment. In other
words, the user cannot access Android
applications, settings, notifications … etc.
The navigation buttons used to navigate the
Android environment have been disabled.
Do not try to use your phone without an
active SIM card installed. If you do, you may
receive an error message.
The RAZ Memory Cell Phone has one primary
screen, which displays up to thirty (30)
contacts. By default, the phone displays up
to six (6) contacts, but this can be increased
to up to thirty (30). If the option to have up
to thirty (30) contacts is selected in the app,
and the user stops using the phone after
scrolling through the contacts, the phone will
automatically move back to contacts one (1)
through six (6) after twenty (20) seconds.
The only instances in which the user leaves
the primary screen is when he or she places
or receives a call or if the option to have a
dialer is selected and the user pulls up the
dial pad. When calls are over, the phone will
automatically go back to the primary screen.
10
To Next Page
Loading...
