46
ENGLISH
SPECIFICATIONS
AMPLIFIER
Output power
Frequency response
Signal / noise ratio
- Mic (1 ÷ 4)
- Aux
Distortion (at 1 kHz, nominal power)
AUX INPUT TONE CONTROLS
- Bass
- Treble
PRESENCE control (inputs 1 ÷ 4)
High-pass filter (inputs 1 ÷ 4)
INPUT SENSITIVITY / IMPEDANCE
MIC (1 ÷ 4)
MIC PHANTOM (1 ÷ 4)
LINE (1 ÷ 4)
AUX INPUT
AUX OUTPUT LEVEL / IMPEDANCE
(pre / music on hold)
‘Phantom power’ voltage / current
LOUDSPEAKER OUTPUTS (POWER: 160 W)
Low impedance
Constant voltage
RADIO
FM range
FM frequency response
FM channel separation (1 kHz)
FM Intermediate rejection
FM Image rejection
FM signal / noise ratio
AM (MW) range
Antenna input
AUDIO CD
Frequency response
Signal / noise ratio
Total harmonic distortion (1 kHz)
Channel separation
PROTECTIONS
Amplifier
Load
Power supply
GENERIC
Operating voltage
Power (consumption)
Dimensions (w, h, d)
Net weight
160 W (RMS)
50 Hz ÷ 13.5 kHz
60 dB
80 dB
< 0.3 %
± 8 dB @ 80 Hz
± 8 dB @ 13 kHz
+ 10 dB @ 2.15 kHz
150 Hz
Balanced – 50 dBu / 10 kΩ
Balanced – 21 dBu / 5 kΩ
Balanced 0 dBu (max. + 16 dBu) / 10 kΩ
Adjustable – 6 ÷ + 13 dBu / 20 kΩ
– 1 dBu / 600 Ω
32 V / 18 mA
4 Ω (25 V)
70 V (31 Ω) / 100 V (62 Ω)
87.5 ÷ 108 MHz
30 Hz ÷ 15 kHz
≥ 30 dB
≥ 70 dB
≥ 50 dB
≥ 55 dB
522 ÷ 1620 kHz
75 Ω – Coaxial
20 Hz ÷ 20 kHz
≥ 86 dB
< 0.2 %
≥ 60 dB
Short circuit, thermal
DC Offset Delay, fuse
fuses
115-230V / 50-60 Hz
350 W
444 mm, 127 mm, 345 mm
8 kg
To Next Page
Loading...
