Shenzhen Reader Technology Co., Ltd
manufacturer parameters and user parameters) through selecting
“Recover Para” when they regulate parameters improperly.
8.5.5 Restore parameters
In the menu interface, select the "Restore Factory Parameters" entry, press the
<Enter> button and then pop up the password input interface. The password input
operation refers to Section 8.9. If the password is input correctly, the system will
restore all the current user parameters and factory parameters with the factory
parameters set before. Interface prompt "recovery parameter is successful".
8.6 Controller setting
Select the "Controller Settings" entry under the menu interface, press the <Enter> button,
and then pop up the controller settings interface as follows:
Press the <Esc> key to return to the previous menu.
8.6.1 Language
Select the "Language" entry under the controller setting interface, press the <Enter>
button, and then pop up the language settings interface as follows:
To Next Page
Loading...