Shenzhen Reader Technology Co., Ltd
1. Overview
1.1 Briefing
RDC6445G system is a new generation system for control of laser engraving and
cutting, which is developed by RD Co., Ltd. In addition to high hardware stability, high
voltage or static electricity rejection, and friendly 5’’ TFT man-machine display. This
system is provided with stronger software function including perfect 4-axle motion control
function, large-capacity file storage, two-channel adjustable digits laser power control
interface, USB driver of stronger compatibility, multi-channel general/special IO control,
and, this system can communicate with PC by USB2.0 or Ethernet, and the
communication mode is automatically checked by the system.
1.2 Description of Controller Model
1.3 Comparison of Controller Performance
One-way 5V,
one-way 24V,
independent
Only one-way 24V
(compatible with 36V
for power supply, but
not recommended)
Only one-way 24V
(compatible with 36V
for power supply, but
not recommended)
Only one-way 24V
(compatible with 36V for
power supply, but not
recommended)
One-way digit
and one-way
analog
Two-way digits and
two-way analog port,
settable
independently and
non-interacted
Two-way digits and
two-way analog port,
settable
independently and
non-interacted
Two-way digits port,
settable independently
and non-interacted
To Next Page
Loading...