SPRAYMASTER 200
19
2.7 Other Settings
2.7.1 Set Step % in Automatic Mode
Cal Mode 2 ( + Power-up ) - Channel 6
In manual mode the '+' and '-' keys drive the valve directly. In automatic
mode the target application rate is adjusted in % steps.
Set the % step here. Press and hold the key, and adjust the factor
using the '+' and '-' keys.
Default: 5%
2.7.2 Units
Cal Mode 3 ( + Power-up ) - Channel 1 : Default = 'MEt'
Press the '-' or '+' key to select 'ImP' for Imperial Units.
Units Metric Imperial
Forward Speed km/hr miles/hr
Area hectares acres
Volume litres gallons
Pressure bar p.s.i.
Flow Rate litres/min gallons/min
Application Rate litres/hectare gallons/acre
To Next Page
Loading...
