6. Aiming & LED Light Setting
5.1 Aiming Mode
The red beam that projected by the scanner can help user to find out the best
reading distance.
Normal mode：red beam appears when the user press the trigger
Always on ： red beam always appears when the scanner is electrified
** Scan one of the following code to select the Aiming mode
5.2 White LED light Mode
The white beam offers auxiliary lighting for reading.
When the white beam projects on the target object, it can improve the
decoding performance and the adaptability of weak ambient light.
Normal mode： white beam appears when the user press the trigger
Always on ：white beam always appears when the scanner is electrified
** Scan one of the following code to select the led light mode
To Next Page
Loading...
