Optional Function settings
Settings of the bar code scanner can be changed by scanning the setup bar
codes included in this manual.
1. Pairing Mode Setting (for wireless mode only)
1.1 One scanner to one base：
One scanner only transmits bar code to one base.
Pairing operation:
Plug the base into your computer ,scan the code "match " to pair the scanner
with the base
Match
Pairing indication:
（1）If the pairing succeeds, the buzzer beeps "DI da""di di di"
（2） If the pairing failed, the buzzer beeps "DI---en"
NOTE：30 seconds after the base is inserted, the scanner cannot match the
base.
If the pairing failed, please unplug the base and plug it again, then scan the
code "match”.
To Next Page
Loading...
