REALINN RL6100-2D - Page 11

7
The scanner can not
hold the charge.
The PC’s USB port is
broken.
Connect the base station
to another USB port for
charging.
The base station or USB
cable is broken.
Contact us for the
replacement
Power on the
scanner, the buzzer
beeps, the green
light on the top of
scanner will be on,
the red scanning
laser does not show
up or become a dot.
The laser head is broken.
Contact us for the
replacement
Scanner and USB
base station are all in
good condition. But
the barcode can not
be sent to computer.
The scanner failed to
match the USB base
station.
Unplug the base station
and plug it in to PC’s
USB port， within 30
seconds scan the
following codes in
order:
“Resrore default”
“match”
“instantly upload
mode”“USB_HID”
The scanner was set to
storage mode，scanned
data will be kept in the bu
ffer of scanner
The scanner was set to
USB virtual com.