11. Interface Setting
11.1 USB-HID mode
In the HID protocol, there are 2 entities: the "host" and the "device".
The host communicates with the device and receives input data from the
device on actions performed by the human.
The most common example of a "host" is a PC.
The "device" is the entity that directly interacts with a human, such as a
keyboard or mouse.
If you want to set the scanner as a keyboard to enter the barcode , please read
code “USB_HID”
11.2 USB virtual COM mode
In USB virtual COM mode, the scanner needs to work with driver and serial
software.
Expected final behavior is that even if you open up another page , the scanned
information will show up in the window of serial software.
Please let us know if you need to set it to USB virtual COM mode，we will send
you the driver.
To Next Page
Loading...
