Step 3. Scan the code “ instant upload mode “to set the scanner instantly upload
barcode.
Instant upload mode
Step 4. Open notepad on computer and move cursor to the blank where scanning
output should be placed. Scanning results can be displayed on notepad then.
( If there is triple quick “di-di-di”beep, that means paired unsuccessful, please
operate the step1 and step 2 again. )
Mode 2. Wired mode
Step 1. Connect the scanner to your computer via USB cable. When the usb cable is
plugged, the scanner will automatically switch to the wired mode by default.
Step 2. Open notepad on computer, move cursor to the blank, scan a barcode to see if
it can be uploaded.
To Next Page
Loading...
