Beijing Reci Laser Technology Co., Ltd
User Guide for Single Module Fiber Laser
2.5 Instructions for use
(1) Before supplying the power to the device, make sure the power supply and
the connection of all wires are correct (See table 2.3 and subsection 4.3).
(2) Keep the outer black cap covered while the device is not in use, dust-proof
should not be absent any time.
(3) There is no warranty in case of no following this instruction.
2.6 Characteristic Parameters
The characteristic parameters of the single module series fiber laser which the
power is ranged from 1000W to 3000W are demonstrated in the table.
To Next Page
Loading...
