Beijing Reci Laser Technology Co., Ltd
User Guide for Single Module Fiber Laser
CAUTION:
Make sure the cooling system works before the laser device does,
and the temperature is required being 25
℃
, when you decide to turn
on the laser device.
3.4 Installation precautions
(1) The laser need to be placed horizontally and fixed, without inversion, side
setting, vibration and impact.
(2) Ensure the power supply wire and the control wire with 16 pin connected
without the electrical power is disconnected.
(3) When the laser is connected to the water cooler, recognize the water inlet and
outlet signs and step after it.
(4) During the installation of QBH, the surrounding environment must be
cleaned, in order to protect the QBH from polluted.
(5) Check the output head and clean it if necessary. If any dust on the QBH end
face cannot be cleaned, please contact Reci, and at the same time the cleaning
procedure must be performed by personnel of Reci or authorized by Reci.
(6) Prevent the delivery cable from treading, excessive bending, smashing with
heavy objects during installation. There would be no warranty if the cable is
damaged due to external force.
CAUTION:
(1)Please make sure the laser optical output and the processing
head are all dust-free before connecting them together.
To Next Page
Loading...
Need help?
General
