Beijing Reci Laser Technology Co., Ltd
User Guide for Single Module Fiber Laser
called specular reflections. Although these secondary beams may be less
powerful than the total power emitted from the primary beam, the intensity
may be great enough to cause damage to the eyes and skin as well as
surface of materials.
WARNING :
You must exercise caution to avoid/minimize specular reflections
as these laser radiations are invisible!
(2) Optical accessories relevant to the laser, such as light-sensitive elements
that may be damaged from exposure to the laser light, video cameras,
photomultipliers and photodiodes, need related protections.
CAUTION :
The Reci Single Module Fiber laser is strong enough to cut or
weld metal, burn skin, clothing and paint. In addition, this laser can
ignite volatile substances such as alcohol, gasoline, ether and other
solvents. During the operating process, the flammable materials
around the laser must be isolated.
(3) Please do not operate laser in darkened environments.
(4) Do not turn on the laser without an optical coupling fiber or the optical
output connector.
(5) Carry out commissioning, calibration and focusing at low output power and
then increase the output power gradually when the calibrating and focusing
work is done.
To Next Page
Loading...
Need help?
General
