Redback SI5000 - PA110 Smart Meter Diagnostics

Redback Technologies
Owner’s Guide – Redback Smart Inverter - v1.4 19
PA110 Smart Meter diagnostics
The Redback PA110 Energy Meter is usually located at the main switchboard. It detects grid energy traffic and sends
information to the Smart Inverter. This information informs inverter operation.
To function correctly, your system requires a working PA110. Contact your installer immediately if you suspect the PA110 is not
working correctly.
LED
COLOUR & PATTERN
MEANING
SOLUTION(S)
OFF
No power to PA
During a blackout, this is normal.
If the Grid is active and the house
Main Switch is ON contact your
installer.
Flashing
Device is communicating
with the inverter.
OK. No action needed.
ON Continuosly
Communications failure
Contact your installer.