Introduction
6 O wner’s Guide – Redback ST10000 and BE14000-HV – v1.6
Important safety instructions – please read
This document contains important safety instructions for products produced by Redback Technologies. Please read all the
instructions and cautionary markings on the product and on any accessories or additional equipment included in the
installation. Failure to follow these instructions could result in severe shock or possible electrocution. Always use extreme
caution to prevent accidents.
AGE INSIDE
the Inverter or Battery Enclosure covers unless qualified to do so or have been instructed to do so
by Redback Technologies technical support personnel.
Do not perform any servicing other than that specified in the maintenance inst
ructions.
Solar arrays may be energised even in low ambient light.
Risk of electrical shock. Proceed with caution.
External and internal parts may be hot. Do not remove covers during operation or touch any
internal parts.
CAUTION: Hazard to Equipment
Only use components or accessories recommended or sold by Redback Technologies or its authorised agents.
Handle all parts with care and follow instructions provided.
ustible or flammable materials in the same room as the equipment. The Redback Smart 3-
Hybrid Inverter and or Battery Enclosures contain relays and switches that are not ignition protected.
Do not allow storage of any item inside the Inverter, or any
items inside the Battery Enclosure other than
Ensure clearance requirements are strictly enforced. Keep all vents clear of obstructions that can prevent proper
air flow around, or through, the unit.
Wait specified time.
This symbol indicates the information provided is important for the correct operation and or maintenance of the
equipment. Failure to follow the recommendations may result in annulment of the product warranty.
e the battery types recommended by Redback Technologies. Follow the battery manufacturer’s
recommendations for installation and maintenance.
Insulate batteries appropriately against freezing temperatures. A discharged battery will freeze more easily than a
Remote or automatic generator control systems: disable the starting circuit and/or disconnect the generator from
its starting battery while performing maintenance.
To Next Page
Loading...
