Redback ST10000 - Features and benefits of your Redback system

Redback Technologies
Owner’s Guide – Redback ST10000 and BE14000-HV - v 1.6 7
Features and benefits of your Redback system
System feature
Benefit
Requirement
Internet connected Inverter monitoring and management using the
MYRedback app or the Redback portal.
Remote viewing of Inverter status.
Permanent internet connection
using your
Wi-Fi or ethernet based
home network.
MYRedback app and the
Redback portal
Monitor your home energy performance in real time,
including up to 3-phases of grid consumption, using
high quality, detailed charts.
See your true usage patterns for ways to further reduce
your electricity bill.
Share system access with family, tenants etc.
Permanent internet connection
using your
Wi-Fi or ethernet based
home network.
All-in-one design Neat appearance; Easy to keep clean.
Status Panel Colour coded LEDs to aid diagnostics.
EMS The Redback Energy Management System (EMS) is the
inverter’s internal Control Board.
I
nternet connection for occasional
software updates.
Switchgear panel Convenient control of solar and battery connections.
Ability to bypass inverter backup without affecting
house or backup circuit.
Low maintenance Homeowner can complete essential annual
maintenance. Service person is not usually required.
Basic mechanical skills and tools.
Supports multiple battery
enclosures
Improved management and consumption of self-
generated energy. Extend the storage capacity to suit
your actual usage patterns.
Ask your
installer for advice on
upgrading your system storage.
Backup functionality Some devices remain available during a grid outage if
batteries have charge.
Optional backup circuit required
and active
; battery required.
Relay control Up to three relay-switched house circuits or devices can
be timer controlled using the MYRedback app or portal.
Requires optional relays and
relay-
controlled
circuits.
Grid power quality
monitoring
Inverter can self-protect from poor quality grid power
and recover when quality improves.
Internal overload protection The inverter will self-protect if it detects excessive heat
or excessive internal currents.
Battery Management
System
Batteries self-monitor to manage heat and State of
Charge (SoC) to extend battery life.
Critical setting protection Critical system settings may only be changed by
electrically qualified personnel.
Solar array ground fault and
insulation monitoring
Electrical safety for all parts of your system.