Redexim MULTI-SEEDER 1200

Questions and Answers

C
Christopher SummersAug 11, 2025
What to do if there is no seed coming out of my Redexim Farm Equipment?
- A
  Autumn CastroAug 12, 2025
  If the Redexim Farm Equipment isn't dispensing seed, first ensure the seed isn't too wet, as this can cause it to stick; use dry seed. Next, verify the gearbox position and adjust it if necessary. Also, check that the lever controlling the seed element valves is open; operate the lever to open the valve. Finally, check the hopper and fill it with seed if it's empty.
M
Molly BentleyAug 19, 2025
How to fix Redexim MULTI-SEEDER 1200 when it does not reach the required depth?
- N
  nathanwatsonAug 19, 2025
  If your Redexim Farm Equipment isn't reaching the required depth, it could be due to several reasons. The ground might be too hard, in which case you should aerate or irrigate. Alternatively, there might be too little pressure on the front roll; adjust the machine so it rests on the front spiked roller only. Also, consider whether there's not enough weight on the machine and mount extra weight if needed. Lastly, check if the spikes are worn and replace them if necessary.
J
Jeffrey AlvaradoAug 27, 2025
Why is my Redexim MULTI-SEEDER 1200 dispensing too much seed?
- S
  Steven SmithAug 27, 2025
  If your Redexim Farm Equipment is dispensing too much seed, it's likely because the lever controlling the seed element valves is fully opened. To resolve this, operate the lever to close the valve.
J
Jeff YatesSep 3, 2025
What to do if the tractor with Redexim MULTI-SEEDER 1200 has no traction?
- A
  Aaron BlairSep 3, 2025
  If the tractor doesn't have enough traction when using the Redexim Farm Equipment, it could be due to the soil being too wet, so set the sowing. Another possible reason is not enough weight on the machine. To fix this, mount extra weight on the machine.