济南红帆科技有限公司
Redsail Tech Co., Ltd
h t t p : / / w w w . e a s y c u t . c n
Chapter One Preface
Thank you for choosing Redsail Series Products！
This manual provide the user with the installation, commissioning, use, fault diagnosis and
maintenance and other related matters needing attention and guidance.In order to make you safe
and proper use of this product, please read this manual carefully before operation, fully
understanding, and please take good care for later often refer to use.
If you have any Suggestions about our products or need our help, please call
us:0531-86516855/56/57,or fax 0531-86516858。
Notes：
Before implementation of wiring, please be sure to shut off the power.
Equipment internal electronic components are particularly sensitive to electronic, so do not puts
foreign body inside or touch the main circuit board inside the equipment.
1. After cutting off the alternating current (ac), if equipment indicator lights of internal driver,
motherboard and laser power is not extinguished,it shows that there is still a high pressure inside
the equipment,which is very dangerous, do not touch the internal circuit and components.
2. Be sure to put the equipment enclosure grounding correctly.
The scope of this manual to be used：
This manual applies to our company M500 series laser cutting machine products.
To Next Page
Loading...
