EasyManua.ls Logo

Redsail M500 - Ventilation and Lighting Setup

Redsail M500
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
M500 使
8
济南红帆科技有限公司
Redsail Tech Co., Ltd
h t t p : / / w w w . e a s y c u t . c n
Ventilator, ventilation pipe connected with the machine:
1·The air duct (6) is connected to the outlet of ventilation (5), and firmly fixed. And then the
other end of the vent pipe is placed outdoors.
2·The ventilation device is placed in the ventilation slots (3), so that the ventilation inlet and
connected the air outlet of devices, and for a reasonable fixed to improve the exhaust smoke effect
of device, and then plug the power input ventilation output plug into a power strip (4).
3.4 Lamp installation
Figure 4
Installation: As shown in Figure 4
The lamp (1) is mounted to its holder in the device (2), and make the lamp power plug into the
lamp slot.
3.5 Power main control switch zone description of device

Related product manuals