Redsail M500 - Chapter Two Abstract; Product Characteristics

M500 激 光 雕 刻 机 使 用 说 明 书
4
济南红帆科技有限公司
Redsail Tech Co., Ltd
h t t p : / / w w w . e a s y c u t . c n
Chapter Two Abstract
M500 Laser Engraving Machine adopts high performance 2 phase stepper motors
adn 2 phase stepper drivers,featured with high engraving speed and high running
accuracy.
2.1 Characteristics
：
 Laser Type: Sealed Glass of CO2 Laser Tube
 Laser Power: 50W（optional 60W）
 Working Area: 500×300mm
 Working Table Lifting Scope：200mm
 Machine Dimension：1150×630×935 mm
 Cutting Speed: 800mm/s
 Repeatability:±0.03mm
 Working Voltage: AC 220V±10%, 50/60Hz
 Total Power: <700W
 Relative Humidity: 5 - 95%
 Minimum Engraving Letter: English 2×2mm
 Image Form: BMP, HPGL, PLT, DST, DXF, AI
 Driving Type: Stepper Motor
 Cooling Method: Water Cooling
 auxiliary device: Ventilator, Water Pump, Air Pump
 Control System: DSP
 Software Compatibility: CorelDraw AutoCAD