Reely NEW1 - Setting the remote control and speed controller

41
b) Setting the remote control and speed controller
You must adhere strictly to the manufacturer's instructions when setting the remote control and programming the
speed controller.
The steering must be set so that the model moves straight ahead when the steering control on the transmitter is in
themiddleposition.Thesteeringdeectiontotherightandleftmustbethesameandthesteeringandwheelsshould
not touch at the full steering angle.
The speed controller must be set so that the motor is switched off when the driving function control on the transmitter
is in the middle position. Additionally, driving functions such as full throttle or brakes must be reliably detectable by the
speed controller so that the motor can be controlled accordingly.
c) Decorating the chassis
The kit comes with various stickers for the windows, headlights, rear lights and air intakes. The position of the stickers
can be recognized easily by the shape of the stickers. In case of doubt, refer to the illustration on the packaging or
illustrations in the Conrad Shop, if necessary. The remaining stickers, like those with the inscriptions “New 1”, can be
attached individually to the model.