Reflexion Arc - Adjust and Preset Functions; Underbed LED Lighting and Preset Reprogramming

9
remote control
ADJUST
PRESET
Zero-G
®
‡
Adjusts your legs to relieve pressure o the
lower back.
Flat *
One-Touch Flat lowers head and foot to flat
position and turns o massage (if running).
TV in Bed Preset Position ‡
Brings head and foot into position for
viewing TV.
Favorite 1 Preset Position ‡
Reprogrammable Preset Position.
Underbed LED lighting *
Turn on/o underbed LED lighting.
* Not user programmable.
‡ Can be reprogrammed to user desired position.
The ZERO G, TV in Bed, and Favorite 1 in bed presets can
be re-programmed to any position chosen by the user.
Simply adjust the bed to the desired position, then hold
any of the 3 buttons down until the remote backlight
flashes twice. The button is now re-programmed.
To restore the buttons to their original positions, depress
the One-touch Flat and Zero-G buttons simultaneously
for 5 seconds. The remote backlight will flash twice to
indicate the original positions have been restored.
Remote Control arrives paired to the adjustable base.
Three (3) AAA batteries are required to operate the remote.
The HEADarrows lift and lower the
head section of the base.
The FOOTarrows lift and lower the
foot section of the base.