EasyManua.ls Logo

Reflexion Arc - Emergency Battery Backup Strap; Installation Procedure; Usage and Detachment Note

Reflexion Arc
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
emergency battery backup strap
For customer service call: 1-800-268-4414
Two (2) 9 Volt batteries are required to operate the power down feature and are NOT included.
Disconnect the Power Supply from the input power cord.
Note: Detach the Battery Backup Strap after the emergency
is over, as the system will continue to draw power from the
batteries even if not in use.
Connect the end of the Battery Backup Strap to the input
power cord that is attached to the control box.
Use the remote control to lower the base.
STEP 3
STEP 4
STEP 1
STEP 2
Control Box
Input Cord
Battery Backup Strap
Connect the Battery Backup Strap to (2) Alkaline 9 Volt
batteries. Do not mix brand name Batteries.

Related product manuals